Meguiar's All Purpose Cleaner is ideal for reconditioning all interior surfaces. The superior foaming action gently lifts the dirt away, while its unique blend of fabric softeners and optical brighteners enhance the look and feel of carpet, upholstery, vinyl and even leather.

Dilution: Heavy Strength 4:1 - Medium Strength 10:1.

Directions: Test small, inconspicuous area for colourfastness prior to use. Apply properly diluted product to surface. If necessary, agitate with a soft brush or clean microfibre cloth/towel. Using a fresh towel, absorb the excess product until surface is dry to the touch. For continuous use, mix concentrate and water in a bucket. Using a brush or towel, scoop out foam and clean desired area.

Professional Tips: To quickly clean floor mats, spray properly diluted product over the entire mat, agitate heavy soiled areas with a brush, rinse with high pressure stream of water, vacuum excess with a wet/dry vacuum and hang dry. Using a foaming sprayer tip and Meguiar's All Purpose Cleaner to clean hard to reach areas such as doorjambs. Rinse thoroughly with water.

Meguiar's Super Degreaser exceeds expectations by quickly breaking down even the toughest grease. Its fast acting, free rinsing formula prevents unsightly white residue stains while its herbal fragrance creates a pleasant work environment.

Dilution: Heavy Duty Degreasing 4:1 - Medium Duty Degreasing 10:1.

Directions: Dilute to required specifications and apply to desired surface. Let sit for 30-45 seconds and thoroughly rinse clean with water. Do not let dry on surface.

Tyre Cleaning: Prior to use, ensure wheels are cool to the touch by spraying with cold water.

Professional Tips: For severe grease accumulations, agitate with brush. To prevent any accidental staining from overspray when degreasing engines, wet adjacent panels with diluted Meguiar's Hyper-Wash or Shampoo Plus prior to application.

Meguiar's Body Solvent changes the traditional method of removing tar, road grime, gum and other petroleum based substances. Instead of applying and scrubbing, its VOC compliant formula can now be sprayed on the surface, allowed to soak, penetrate and break down the contaminant, then wiped clean with ease.

Dilution: Ready to use.

Directions: Use on a clean, dry vehicle. Spray or wipe on, let sit for 30-45 seconds, wipe off.

Professional Tips: Meguiar's Body Solvent is a safe choice for cosmoline removal. Simply spray on affected area, allow to dwell for 45 seconds and wipe clean.

Meguiar's Wheel Brightener is the product of choice for professionals looking for a powerful wheel cleaner that quickly and effectively removes tough brake dust. There is a thin line between effective cleaning and dangerous to use products. Wheel Brightener gives users the ultimate in flexibility, cleaning and safety with one product.

Dilution: Up to 4:1 (or even up to 10:1 on delicate rims).

Directions: Apply only to wheels that are cool to the touch. Dilute to required strength and spray on cool, dry wheel surface. Let sit for 30-45 seconds and rinse with water. Clean and rinse one wheel at a time. NOT FOR USE ON POLISHED ALUMINUM OR ANODIZED WHEELS.

Professional Tips: For severe accumulations of brake dust, use a wheel brush and agitate area during the application of Wheel Brightener.

Meguiar's Glass Cleaner Concentrate easily and consistently removes tough vinyl fog residue, road grime, smoker's film and bug splatter, producing crystal clear, streak-free glass. For every concentrated gallon, you get eleven ready-to-use gallons of glass cleaner.

Dilution: 10:1.

Directions: For best results surface should be cool to the touch, and applied out of direct sunlight. Spray diluted product directly on surface to be cleaned. Using a soft microfibre cloth/towel folded into quarters, wipe clean. Turn towel frequently to ensure a clean side is used.

Professional Tips: When making your final wipe on the exterior glass, move the towel in a left to right motion; on the interior glass move the towel in a top to bottom motion. This will easily identify the side of the glass where any streaks may have occurred.

Meguiar's Hyper Wash - Typical dilution rates are obsolete when comparing them with Hyper-Wash. Using innovative techniques Meguiar's has created a product that produces rich, stable foam at an unbelievable dilution rate of 400:1. Its biodegradable formula safely and effectively lifts dirt and grime off all surfaces.

Dilution: 400:1.

Directions: Mix 1 oz. per five gallons of water. Wash vehicle. Rinse thoroughly.

Professional Tips: To prevent any accidental scratching of paint, use two wash mitts at all times; one for the upper portions of the paint and the another for the dirtier, lower portions. The simple technique will ensure the dirtiest panels are cleaned separately, thus helping to prevent scratches. The "Two-Bucket Wash Method" is also strongly recommended.

Meguiar's Shampoo Plus lubricating formula and luxurious foam team up to gently clean and condition even the most delicate clear coat surface without scratching. Its conditioning formula deepens gloss, boosts shine and leaves a highly reflective, slick surface, making it the perfect choice for the ultimate car wash.

Dilution: 128:1.

Directions: Mix 1 oz. per one gallon of water. Wash vehicle. Rinse thoroughly.

Professional Tips: After rinsing, remove the nozzle from the hose and allow the water to run freely over the surface. This will allow the water to sheet off cutting your drying time in half and reducing the chance of causing (drying) towel scratches.

Meguiar's X-Press Liquid Wax uses a unique blend of wax and polymer agents to produce deep, rich gloss with lasting protection. This formula provides ease of application and instant wipe-off, making it the perfect choice for any production environment where Meguiar's quality results are as essential as speed and efficiency.

Dilution: Ready to use.

Directions: Shake well and apply a thin even coat of product to a clean surface using a soft foam applicator pad. X-Press Liquid Wax may be applied by hand, or with an orbital / dual action polisher. Allow the product to dry and then wipe down / buff paintwork with a soft microfibre buffing cloth.

Professional Tips: To optimise speed and performance, apply X-Press Liquid Wax to the entire vehicle and then wipe off all product at once.

Meguiar's Last Touch Spray Detailer produces incredible depth, shine and gloss. This spray-on, wipe-off product has a unique blend of polymeric lubricating agents that gently removes dust, fingerprints, smudges and other contaminants, leaving a flawless, showroom shine.

Dilution: Ready to use.

Directions: For best results, surface should be cool to the touch. Do not apply in direct sunlight. Spray directly on surface to be cleaned. Using a soft microfibre buffing cloth folded into quarters, wipe clean. Turn to dry portion for final wipe.

Professional Tips: Last Touch Spray Detailer is also the perfect lubricant for use with detailing clay. Dilute 1:1 and apply a liberal amount to the surface.

Meguiar's All Season Dressing is a VOC compliant formula that produces a deep, rich, long lasting shine on all exterior rubber and plastic surfaces. Old or new, weathered or worn, All Season Dressing will give you the desired results time after time.

Dilution: Ready to use.

Directions: For best results, always apply to a clean dry surface. Spray evenly over surface, allow product to dry.

Professional Tips: After spray application, lightly dampen a towel or sponge with All Season Dressing and wipe over the surface, especially in grooved areas.

Note: Possible staining on painted and non-painted plastic panels. Should splatter occur, remove immediately. Do not use on tyres or seats of motorcycles or where slippery surfaces would in effect be a safety hazard.

Meguiar's Hyper Dressing - Until now, the industry average for diluting water based dressings has been one to one or ready-to-use. Meguiar's Hyper-Dressing dilutes up to four to one, varying the gloss from high to satin. One product, multiple uses ... a winning combination for every professional and an industry first.

Dilution: High Gloss 1:1 - Medium Gloss 2:1 - Satin Finish 3:1 - Natural Finish 4:1.

Directions: For best results, dilute to proper specifications. Spray or wipe onto surface.

Note: When applying to tyres, wipe off excess (especially in grooved areas) to prevent spin-off which may stain painted plastics. Do not use on tyres or seats of motorcycles, bicycles or other two-wheeled vehicles or surfaces that should not become slippery.

Professional Tips: To restore shine and lustre to all engine components, clean engine compartment with Super Degreaser or Safe D-Greaser, blow excess water with compressed air and apply liberal amounts of diluted Hyper-Dressing and allow to dry.

Meguiar's Leather Cleaner & Conditioner is expressly formulated to enhance the appearance of interior leather and vinyl surfaces. Specialized cleaning and conditioning agents are designed to safely clean and restore leather's original look and suppleness.

Dilution: Ready to use.

Directions: NOT FOR USE ON SUEDE. Test small, inconspicuous leather area for colourfastness prior to use. Apply a small amount of Leather Cleaner & Conditioner to a clean, dry, foam applicator pad. Work thoroughly into surface. Wipe off excess product using a clean microfibre cloth/towel. Reapply as needed.

Professional Tips: For severely soiled areas pre-treat surface with Meguiar's All-Purpose-Cleaner diluted 10:1.

Concentrated Wash Shampoo for After-Care of the Car-Lack Sealant Coating.

This revolutionary product dramatically reduces the time and effort required to restore an abused or neglected paint finish. It cuts so fast and leaves the finish looking so good; it's hard to believe possible. The secret is Meguiar's exclusive micro-abrasive technology created for Meguiar's state-of-the-art products for body shops and detailers. Ultimate Compound is ... the ultimate compound. Seal paintwork afterwards with a quality sealant or wax. For brilliant, high-gloss, wet-look, non-stick protection, we ourselves recommend DRIVEN Auto Polish (Sealant).

Meguiar's Ultimate Compound - Restores colour/clarity to abused and neglected finishes - Cuts as fast as harsh abrasives, without scratching - Obsoletes traditional rubbing and polishing compounds - Use by hand or with a dual action polisher.

Car Guys are constantly asking how best to remove light swirl marks, cobweb-effect, and holograms to restore crystal clear reflections and a show car perfect shine. The answer is clear! Swirl X draws from Meguiar's professional body shop and detailing products expertise to deliver real results quickly, with minimum effort. This non-abrasive formula gently smooths away micro-fine swirl marks on all paint finishes.

Meguiar's Swirl X - Effortlessly removes/reduces swirl marks while improving colour and clarity - The easy-to-use solution for the #1 paint problem - Use by hand or with a dual action polisher.

Seal paintwork afterwards with a quality sealant or wax. For high-gloss, wet-look protection, we ourselves recommend Collinite 845 Insulator Wax.

Premium Polymer Auto Polish (Sealant) - Safe for All Automotive Finishes; Super High-Gloss Wet-Look; Maximum Sun Protection; Nothing Sticks; Water Spots Wipe Off. (One-Step Mild Cleaner, Polish and Sealant). Highly Recommended.

Super high gloss wet look with incredible depth and clarity - Sheeting action reduces water spots that wipe clean - Nothing sticks, harmful elements can't "bite in" - Easy to apply in sun or shade - Can be applied to an entire vehicle before wiping off, will not harden or cake - Long lasting, holds up under intense heat from sun and severe winter cold for up to one full year - Maximum U.V. inhibitors prevent sun damage - Cleans surface contaminants and oxidation with no abrasives - Fills light swirl marks and leaves no residue - Repels water from windows in the rain without the use of wiper blades - Cleans brake dust from rims. Once applied, non-stick finish reduces brake dust build up - Paint life is dramatically extended by feeding with essential polymers and oils.

Safely Cleans and Protects: Clear Coat, Fibreglass/Gel Coat, Enamel, Acrylic Enamel, Lacquer, Polyurethane, Powder Coat, Metallic Finish, Chrome, Glass, Mirrors, Plexiglass, Alloy Wheels, Chrome, Aluminum, Stainless Steel, Magnesium.

Seals and Protects against Harsh Elements: Water Spots, Bird Droppings, Bug & Insect Residues, Tree Sap, Road Tar & Salts, Acid Rain, UV Rays.

Wide Range of Applications: Cars & Bikes, Vans & Trucks, Caravans & Motorhomes, Boats & Yachts, Personal Watercraft & Outboard Motors, Fifth Wheel Trailers, Light Aircraft, Snowmobiles, All Terrain Vehicles.

Directions: Wash and dry vehicle surfaces before polishing. Application in the shade is preferable. Shake bottle well. Apply with a soft (damp) foam applicator pad. Massage polish into the finish really well to lift surface contaminants and oxidation. Let dry to a haze for 15mins. Buff to a high-gloss shine with a soft microfibre cloth. Repeat with a second coat if desired. Works by hand application or with an electric buffer.

Note: Will last up to a full year, yet polishing more often and with multiple coats is beneficial. The surface becomes increasingly non-stick. Polish does not build up or yellow. For heavier oxidation, water spots, and light surface scratches use a restorer polish first, before sealing with Driven Automotive Polish. Not for use on vinyl/plastic or rubber trim.

Concentrated Wash Shampoo for After-Care of the Gollit Sealant Coating.

Concentrated Wash Shampoo with Added Protectant, for After-Care of the Gollit Sealant Coating.

The Grit Guard helps prevent swirl marks (micro-marring) inflicted during the wash process, by removing small particles of dirt and debris which would otherwise be rubbed across the surface of the paint. The Grit Guard fits into the bottom of your wash bucket. It helps to keep dirt particles at the bottom of the bucket, rather than mixed throughout the entire wash (shampoo) solution.