Re-Structure Professional Polish: Last Step Product or One-Step Polish / Protectant (Nano-Technology Sealant) - Suitable for Marine, Aviation and Automotive Paints; Fibreglass Gel Coat, Glass, Plexiglass, Polycarbonate, Carbon Fibre, Brass, Chrome, Stainless Steel, Polished Aluminium, Alloy Wheels, Non-Porous Hard Plastics, Granite, Varnished Woods and More.

Shine, Seal and Protect with Re-Structure Professional Polish + RALGŪ - An Optically Clear, High-Performance Sealant.

* A Non-Stick, High-Gloss, Glass-Like, Wax-Free, All-Weather Sealant (Non-Abrasive Sealer Polish);

* Bonds to Surfaces at (sub-surface) Molecular Level = Superior Protection and Greater Longevity;

* VOC Compliant: Zero-Petroleum, Non-Solvent, Water-Based Formula => Environmentally-Friendly;

* Apply by Hand: Wipe-On, Work-In, Minimal Buffing Off or with a Low Speed Orbital Buffer (Only).

Apply to New, Like-New or Restored Surfaces Only (i.e. Clean, Uncontaminated, Oxidation-Free and Wax-Free). For contaminated or oxidised surfaces, buy and use Re-Structure Micro-Finishing Compound first (as a preparatory treatment), before following-up with an application of Re-Structure Professional Polish (Sealant). See Combo Pack Below.

Coverage Guidelines (Approx): 1 x 355ml Bottle = 15 to 30 ft Boat; 2 x 355ml Bottles = 30 to 55 ft Boat / Yacht; 3 x 355ml Bottles = 55 to 80 ft Yacht (Hull); 4/5/6 x 355ml Bottles = 55 to 80 ft Yacht Including Flybridge; 6/7/8+ x 355ml Bottles = 80 to 120 ft Yacht Including Flybridge.

Re-Structure Micro Finishing Compound: Oxidation Remover / Surface Cleanser, Colour Restorer, Gloss Enhancer; Blemish and Scratch Remover [Filler] for Fibreglass and Metal Surfaces; Excellent for use on all Paints, Fibreglass Gel Coat, Stainless Steel, Chrome and Polished Aluminium. For Nearly-New and Dull (Lightly to Moderately Oxidised) Surface Conditions. Follow-up afterwards with an application of Re-Structure Professional Polish, for long-lasting protection.

Re-Structure Micro Finishing Compound with RALG, should be used to remove mild oxidation, scratches and blemishes from paint and fibreglass gel coat. Apply the compound to cool clean surface, using a soft foam or soft microfibre applicator pad. Polish by hand in a brisk circular motion, until oxidation has been lifted and the appearance of scratches reduced or removed. At this point, the nano particles have bonded with the surface, filling in pores and scratches and leaving behind a level, rock hard, glass-like finish. In essence, work the product into the finish until a high-gloss appears. We recommend wiping down or buffing surfaces after application with a soft microfibre cloth, to wipe away any residual compound and to fully reveal the product's glass-like finish. For extended protection, follow-up by applying a thin coat of Re-Structure Professional Polish (Sealant).

N.B. Unlike Professional Polish which is fomulated for application by hand, Micro Finishing Compound in addition to hand application, may be applied with a low to medium speed buffing machine ... 1800 RPM Maximum and using the compound very sparingly. Micro Finishing Compound has no abrasives or rouges, so will not remove any damaged gelcoat. You will need to use a rubbing compound and buffer to bring back your gel coats natural shine.

Re-Structure Professional Polish: Last Step Product or One-Step Polish / Protectant (Nano-Technology Sealant) - Suitable for Marine, Aviation and Automotive Paints; Fibreglass Gel Coat, Glass, Plexiglass, Polycarbonate, Carbon Fibre, Brass, Chrome, Stainless Steel, Polished Aluminium, Alloy Wheels, Non-Porous Hard Plastics, Granite, Varnished Woods and More.